|
|
|
Diamond Slipstone 1200 GRIT
Finally I have a super fine diamond slipstone available in a 1200 grit. It is the same shape as the 600 grit, but with the finer particles. Primarily designed for bench and carving tools, or turners who want a burst of extra sharpness. Size: 5" long, 2" wide and 1/4" thick. This is not the hone shown in the Craft Supplies catalog using my name--which is a flat, one-side plated hone and not a slipstone.
Price: $95.00
Retail: $95.00
You Save: $0.00
|
|
|
|
|
Diamond Slipstone 280 Grit
A companion to the 600 grit diamond slipstone. With two different radiused edges, these fit the inside of virtually all woodturning gouges on the market--in order to "slip" the inside flute for a sharp edge. The 280 grit is an aggressive hone for those who would rather hone a dull edge than head to the grinder. Comes with a premium leather sheath.
Price: $95.00
|
|
|
|
|
Door Knob Kit
Interior door knob kit for turning your own custom knobs. Metal parts for creating the shape and sizes of knobs using your own wood. Wood is not included in this kit. Comes with a 1/4" square shank spindle that must fit the existing latch mechanism--or you must install a replacement latch (usually under $10).
Price: $21.95
Retail: $21.95
You Save: $0.00
|
|
|
|
|
Oneway Drill Wizard
An amazing jig system for accurately drilling angles on spindles and face work (such as stool seats). It requires an indexing head lathe and a 1" stem banjo/tool rest base. Drill and lathe not included.
Price: $116.00
Retail: $119.95
You Save: $3.95
|
|
|
|
|
Oneway Stronghold #1 Jaws
These serrated small jaws for the Oneway Stronghold chuck are excellent for holding small work. Range of gripping on the inside of these jaws: 3/8" to 1 7/8".
Price: $48.00
|
|
|
|
|
Oneway Stronghold #2 Tower Jaws
Deep #2 Tower Jaws for the Oneway Stronghold Chuck. Gripping range internal is 2" to 3 3/4". These have "Profiled Jaws" for greater holding power and larger gripping surface than even the serrated or smooth jaws.
Price: $59.00
|
|
|
|
|
Reverse Chucking Jig
Reverse chucking jig for completing the lower portion and bottom of bowls and vessels. Often referred to as a compression or friction type chuck. Work is trapped soundly between the jig and the tailstock center. Also useful for re-turning the tenon of a roughed out bowl or vessel to remount into a scroll type chuck. Works equally well on natural edged bowls and flat rimmed bowls.
Price: $76.95
|
|
|
|
|
Robust Lathes
Robust lathes, made in Wisconsin, are machines with strength and quality that are turning heads everywhere. The image shown is of the American Beauty with a 25" capacity over the bed, and 28" between centers. Options include an outboard capacity that will allow turning up to 60" diameters, and a bed extension that allows 52" between centers.
Price: $6,395.00
|
|
|
