Loading... Please wait...

Our Newsletter


Sort by:

Hamlet of Sheffield Turning Tools

  • Pages:
  • 1
  • 2
  • Hamlet 1/8" wide parting tool HANDLED
    $44.00 Hamlet 1/8" Parting Tool HANDLED
    Hamlet 1/8" wide parting tool with handle.  Overall length is 16" with the blade length of 6".  Made by Hamlet of Sheffield England from M2 high speed steel.

  • Hamlet 1/16" wide parting tool
    $39.00 Hamlet 1/16" Parting Tool HANDLED IN STOCK AGAIN
    A very narrow parting tool when there is a necessity to get in to tight places.  Only 1/16" wide, 1 1/4" and across the blade and approximately  9"  long.  Made by Hamlet of Sheffield England from M2 high...

  • 1/2" wide heavy duty scraper HANDLED
    $66.00 Hamlet 1/2" heavy duty scraper (Alan's box scraper) HANDLED
    This is a wonderful scraper for hollowing end-grain work, especially when doing such items as lidded box, goblets, scoops and smaller end-grain bowls. It is 1/2" wide, 3/8" thick and approximately 20" in length  (which...

  • 1 1/4" wide bowl scraper HANDLED
    $84.00 Hamlet 1 1/4" Heavy Duty Bowl Scraper HANDLED
    This is the bowl scraper preferred by Alan for its weight and grind.  It is a side radius grind and is made from 5/16" thick  and 1 1/4" wide M2 high speed steel.  This is the handled version, using European...

  • Henry Taylor SuperFlute Bowl Gouge with handle
    $108.00 SuperFlute Bowl Gouge by Henry Taylor IN STOCK AGAIN
    This is the bowl gouge that changed the face of contemporary bowl turning.  Introduced by Henry Taylor Tools of Sheffield  (now combined with Hamlet Tools) in 1978 it was the first gouge that became known as a...

  • Hamlet/Henry Taylor Little Sister Hollowing Tool
    $85.00 Hamlet Little Sister Hollowing Tool OUT OF STOCK
    This is a wonderful tool for smaller hollowing operations.  It is primarily a tool for end-grain hollowing with such projects as lidded boxes, goblets, smaller end-grain bowls and vessels.   It has a limiter...

  • Double-ended Bowl Gouge
    $92.00 Hamlet Double Ended Bowl Gouge SOLD OUT
    A wonderful alternative to owning two different gouges of the same size:  different grinds on each end of the same gouge, or the same grind on both ends reducing time for resharpening. Overall length is 15.25". The...

  • Hamlet 13" Tool handle, 1/2" opening
    $62.00 Hamlet 13" Interchangeable Tool Handle 1/2" hole
    A 13" interchangeable tool handle for round shank tools 1/2" in diameter.  It is possible to fit some flat-tang tools into the 1/2" opening, but it will be a test to fit operation.  The steel core is covered with a...

  • Nine inch handle with 3/8" opening
    $54.00 Hamlet 9" Interchangeable Handle 3/8" hole
    This is a wonderful small handle for all of your 3/8" diameter round-shank turning tools. The overall length is just over 9".   It will also take some flat tang tools but it will be a question of testing to fit (for...

  • Decorating Elf Texture Tool
    $59.00 Decorating Elf Texturing Tool BACK IN STOCK
    The Decorating Elf texturing tools is one of the most versatile of such tools on the market today.  I find it works best on end-grain, and especially hard end-grain woods like hard maple, Osage orange and many exotics...

  • 3/4" Spindle Roughing Gouge unhandled
    $47.00 Hamlet 3/4" Spindle Roughing Gouge UNHANDLED
    The Hamlet of Sheffield 3/4" spindle roughing gouge without handle, made from M2 high speed steel.NOT FOR FACE-GRAIN BOWL/VESSEL TURNING!A versatile tool for roughing smaller diameter spindle pieces  (long-grain...

  • Hamlet 1/2" Bowl Gouge HANDLED  (5/8" diameter)
    $77.00 Hamlet 1/2" Bowl Gouge HANDLED (5/8" diameter)
    Hamlet of Sheffield's 1/2 high speed steel bowl gouge made from a 5/8" diameter rod.   The 1/2" designation is the English measurement system of gouges--in North America this would be a 5/8" gouge. This is the...

  • Hamlet 1 1/4" Spindle Roughing Gouge HANDLED
    $77.00 Hamlet 1 1/4" Spindle Roughing Gouge HANDLED
    Hamlet of Sheffield 1 1/4" wide spindle roughing gouge in M2 high speed steel.  The overall length is 20.5" and the steel length from the handle ferrule is 6.5".  NOT FOR FACE-GRAIN BOWL/VESSEL TURNING!An excellent...

  • Hamlet Lacer Signature Skew  1 3/8" KRYO HSS
    $149.00 Hamlet Lacer Signature Skew 1 3/8" KRYO HSS
    This is the M2 HSS skew in 1 3/8" width  (shown in top of picture) that I have carried for many years, but has undergone the process of cryogenics (extreme low temperature) between tempers.  This leads to a more...

  • Hamlet Lacer Signature 5/8" KRYO HSS  BACK IN STOCK
    $109.00 Hamlet Lacer Signature 5/8" KRYO HSS BACK IN STOCK
    This is the 5/8" wide  (lower image in picture) that is made from M2 HSS but has undergone the treatment of cryogenics--extreme cold applied between tempers.  This gives a more uniform structure of the steel,...

  • Hamlet 3/8" Bowl Gouge UNHANDLED
    $58.00 Hamlet 3/8" Bowl Gouge UNHANDLED
    High speed steel 3/8 bowl gouge made from a 1/2" round rod.  Unhandled.Made by Hamlet of Sheffield England of M2 high speed steel, this is a great finishing size of bowl gouge or if you have a lathe that is lighter or...


  • Pages:
  • 1
  • 2